Bamboo Fence Rolls Deluxe

To enjoy your Bamboo Fence Roll Deluxe for as long as possible, it is very important that it is mounted properly. We strongly recommend installing the Bamboo Fence Roll Deluxe just above ground level to prevent it from getting damp for long periods of time. Moisture can cause discolouration and mould on the Bamboo Fence Roll Deluxe over time.

To attach a Bamboo Fence Roll Deluxe to a wooden fence or wall, first drill 4 mm holes through the bamboo poles. Pre-drilling with a 4-mm drill is necessary here, as the bamboo may otherwise crack. Do this every +/- 20 cm and screw down the Bamboo Fence Roll Deluxe with 4 x 40 mm screws. Screw the Bamboo Fence Roll Deluxe to both the top and bottom for maximum stability. For fixing the bamboo fence roll to a wall, plugs are often used for the screws.

If the Bamboo Fence Roll Deluxe is secured to a mesh panel, it is best to do this with tie-wraps or binding threads. These can be tied around the iron wire of the bamboo fence roll every +/- 20 cm. Again, attach the Bamboo Fence Roll Deluxe both at the top and bottom for maximum stability.

The width of the Bamboo Fence Roll Deluxe can be easily adjusted by cutting the iron wires. Be sure to cut two poles beyond the desired width while cutting. Then remove the two outer poles from the Bamboo Mat Deluxe and bend the steel wires back over.

The height of the Bamboo Fence Roll Deluxe can also be adjusted. Only cut from the bottom of the mat and preferably not beyond the steel wires. This could reduce the strength of the mat. When cutting the Bamboo Fence Roll Deluxe, use a Japanese Saw, which has a sharp blade with fine teeth. Cover the bamboo sticks with tape on the saw edge before sawing to avoid splintering. Saw slowly and preferably cut by hand.